GENUINE Aptiv (Delphi) 4 Pin Connector
THESE CONNECORS ARE PULL TO SEAT - THIS MEANS THE WIRES PASS THROUGH THE CONNECTOR BEFORE BEING CRIMPED TO THE TERMINALS
This connector is used in the following applications;
- LS1 (Cable Throttle) Idle Air Control Stepper Motors
Connector Kit which includes:
- 1x Connector Body
- 4x Terminals (+1 Spare)
This kit Requires you to crimp the terminals yourself (instructions included)
INSTRUCTIONS HERE
Please check the photos carefully to ensure you are ordering the right connector, many connectors look the same but have slightly different keyways!