Please Note - Dirty South Race Engineering is Operated After Hours & on Weekends ONLY! The best way to contact us is currently Via Email and we will get back to you as soon as we can.

LS1 & LS6 PCM (ECU) Pinout

Don't say we don't do anything for you guys! 


We know how frustrating it can be trawling the web for info, only to find a forum post from 2008 with a broken photobucket link. So here is a condensed copy of the LS1 P01 and P59 PCM pinout for 99-06 AUSTRALIAN delivered vehicles for your convenience.

We understand the DIY'ers at home sometimes want to have a go at building their own swap or standalone harness and we have absolutely no issue with that, as long as it is done with safety in mind. Safety comes from knowledge.

So use at your discretion, understanding we are not liable for any misinterpretation of this information and LS Swap the world! 

Please Note - All PCM's Will Require VATS to be Disabled before they can be used in a swap application. We offer this service and it can be found HERE

 

 

LS1 ECU Pinout Image 1

 

LS1 PCM ECU Pinout
LS PCM Pinout
LS ECU Diagram Pinout

5 comments

  • What pins are for obd 2 thanks for the help

    Jose Martinez
  • exelente material…..podran ayudarme con pinout de un toyota rush PCM DENSO 89560 B4010 112300 3232 12V…O INDICARME DONDE PUEDO ENCONTRAR DICHA INFARMACION …DESDE YA GRACIAS

    luis guzman
  • Thanks for this pin out guide, I have been looking for one to match my VY LS1 wire loom for days on the net. I am now confident to start removing redundant wires.

    Rodney
  • thanks for the pinout information guys it helped us out of a jam cheers

    hwyls1
  • Hi ls1 5.7 auto to aVh commodore looking for reference pin out diagram for stand alone loom to my ls1 loom
    your help would be greatly appreciated thankyou

    rocco

Leave a comment

Please note, comments must be approved before they are published